Happiness often sneaks in through a door you didn't know you'd left open

John Barrymore

Well the holidays are done and now the business of winter is in full swing.  But much solace can be be taken from these two beautiful happy faces. It is a period of change so Elsa and Anna were happy to have a joyous Christmas.

And now to chairs. I love dividers. There I said it.  These two beauts are from Starrett...a 6" and 12" respectively. One thing I love about chair making is you are always learning something new. Sometimes it's something big, sometimes its a small tweak to a method that makes a small but nonetheless significant difference. And know that when I say a significant difference I really mean it made something easier.

And so today I came up with a wizz-banger. I've always loathed leveling a rocker. A non rocker is easy. Wedges, trace the difference, cut, done.  But rockers have routed slots and therefore the slots have to be traced and chopped which is a major pain. The problem lies in the inconsistency of reaming. Some legs simply get reamed too much despite my best efforts.

SO today I thought why not check the length of the legs AFTER they are reamed and seated. So I checked them with my handy dandy 12" divider and viola they were off as you can see below. Now admittedly it's not much but try chopping out end grain hard maple and you'll fast appreciate this small difference.

I marked out the difference and I was a simple matter to turn to the new length. I turn the legs to length anyway so a different mark is no big deal.

The pics above and below show the small difference. The one above ( these are both back legs. Do not compare front to back...only front to front, back to back ) the shortest leg is the base line and the longer one, below, is turned shorter.  I have yet to install the rockers but this does make a difference in the final balancing of the chair.