“Do I contradict myself? Very well, then, I contradict myself; I am large -- I contain multitudes.”
― Walt Whitman
Here is the indoor picture of my newest chair, it is so comfortable, but hopefully it will be gone. I will miss it but I can always make more.
Ok, this blog post is about change, changing the tools and the things that you have around you that you gripe about but live with. Light a candle instead of cursing the darkness, all that. Well, after much griping about this riving brake, I finally added about 6" to the top, as you can see. I just scabbed on some scrap 2X's and drilled some holes for the pipes, and what a difference. I found the other set up too low ( sorry Pete ) and this made a world of difference.
The above and below pics show changes I made to the handle of some tools. The above pic shows a couple lathe gouges that I cut the handles off. The problem was rolling from left to right, the handle (it used to be as long as the top one) hit my body, so chop and what a difference. And in turning, I need all help I can get!
The below pic shows how I shortened the handles on my chisels. Used to be, 100 years ago, chisel handles were graduated with the size of the chisel, small chisel, small handle. That was then, this is now...now being one size fits all. By cutting off about an inch and a quarter, it really improved the balance of the chisel.
And finally a pic of the darkness that started the flurry of change. The scorp shown below ( I use this to shape the seats ) is pretty old, probably 10 years, and it came with the crudely shaped handles that I love! All about function, no finish, perfect. Then I bought Barr's drawknife and it came with these handles, which I hated but lived with for too long. They are shaped all wrong and the finish is slick, so finally I got a little upset, ok, mad, and made some new ones, just like the clunky old ones that work perfectly. They work great, a lot more grip and to me they just look right.
So, don't be afraid to change a handle here or a riving brake there, or whatever else you are cursing in the darkness.
Friday, September 7, 2012
Tuesday, August 28, 2012
Carving the Arms
Nowadays people know the price of everything and the value of nothing.
Oscar Wilde
Here is a great shot of the arm on my newest chair. This is the trickiest part, by far. The trick, or skill, is to get the arris, the edge where the flat falls off, the same on both arms. I like it to form a gentle curve, just like this one. Below you can see how I leave the tool marks on the end and also on the underneath.
People are amazed to find out that I use a drawknife and spokeshave to shape the arms, that's it. I draw reference lines on both arms, just guessing on what will look good. I do both arms at the same time, so hopefully they will be the same.
Then, holding the arm in my shavehorse, I carve to the lines, and then blend the high points to get it smooth. I want the top part flat, so I finish up with a spokeshave and a bit of sandpaper.
Here is the tenon that goes thru the back post. It is a stepped tenon, 7/8" for about 1/4" and then 3/8" all the way thru. This tenon is turned on the lathe, which is pretty exciting as it is an offset turning.
Below you can see the tools I use. The big thing is to keep the arms the same, constantly checking one against the other. They really are hard to do but they add so much visual impact to the chairs that they are well worth it.
Saturday, August 18, 2012
Crest Rail Tenons
Out, out, brief candle!
Life's but a walking shadow, a poor player
That struts and frets his hour upon the stage
And then is heard no more: it is a tale
Told by an idiot, full of sound and fury,
Signifying nothing."
- William Shakespeare, Macbeth, 5.5
I'm gonna touch briefly on the crest for the rockers I make, specifically on forming the tenon that goes into the post. I cut the mortise on a hollow mortiser, which does a great job quickly.
Here's a look at the finished tenon where it goes into the post, nice and neat. The crest is rough cut on the bandsaw and then steam bent and dried. The tenon is formed after the drying, otherwise the size would be off.
I find the shavehorse is the best way to hold the crest, but you could use a vise. The layout is done and the tenon is lined out at 3/8". The back side remains flat. I cut the cove with a drawknife, just proceed carefully and leave the tenon a little thick, then shave or scrape it to size when you assemble the chair. You want a good fit, but believe me you don't want to have to beat it in with a hammer, a tight slip fit is best.
On another note, please check out a great blog by Wilson Burnham, an luthier from Allen Park, CO. He had a great blog here, check it out. I got the idea for the literary quotes from him, by the way.
Thursday, August 16, 2012
Cutting Coves, sort of
I'm bad and I'm going to hell, and I don't care. I'd rather be in hell than anywhere where you are. ”
― William Faulkner
Here are two chairs I just finished up and took to the Gallery at Frenchman's Bay. I have nothing but the highest respect for Curtis Buchanan and Pete Galbert, and their methods, but I am always trying to find faster ways to get stuff done without sacrificing the strength or aesthetic of the piece. I use only hand tools on the seat, and the spindles, but I have found a different way to cut the cove that is located on the back posts on some of my rockers.
Below you can see the cove I'm talking about. I can and have done this with a drawknife, and if I am not in a hurry, I enjoy that method. But sometimes the clock is ticking.
So I use my jointer to cut the cove all the way down the post. The vertical line on my fence to the left is used to change the knives, so ignore that one for now. The line to the right represents the line where the cut ends, and this is the important one.
I should point out that is VERY DANGEROUS! I do it and feel reasonably comfortable doing it, this post is more how I do it rather then a suggestion that you should do it this way. It is a big cut, about 3/8" in one shot, so I am very careful. But it does work, the cove is perfect. You can see the line on the piece that then lines up with the aforementioned line on the fence.
And here's what happens to the pieces that don't come out right, in this case I mis-marked the line on the piece. Does a great job holding up the tomato cage though. Great year for my tomatoes, and zucchini, more on that to come.
Tuesday, July 24, 2012
Steam Bending Kiln Dried Cherry, Second Try
“I was depressed, but that was a side issue. This was more like closing up shop, or, say, having a big garage sale, where you look at everything you've bought in your life, and you remember how much it meant to you, and now you just tag it for a quarter and watch 'em carry it off, and you don't care. That's more like how it was.”
― Jane Smiley, A Thousand Acres
― Jane Smiley, A Thousand Acres
First off, here's a pic of my two latest chairs. They're the same save for the colors, one is brownish and the other is almost black with a hint of brown underneath. They are going to a gallery, The Gallery at Frenchmans's Bay, which is in Somesville, MDI. I was excited to get in there as there are pieces by builders that I have seen in magazines and such. In September Tyra, the owner, is having reception so hopefully I'll get to meet some as well.
As you may remember from my last post, the posts cracked when I tried to steam bend them. So, I soaked the new pieces for a few days in some water, hoping this would soften the fibers somewhat.
I also steamed them longer and closed the door on the steambox to raise the temperature a little. I also tried to think of a way to use straps to support the bends. Time for some honesty...I use straps. There, I said it. Wood bends, or rather compresses, a lot. Wood expands very little, ie it can not be stretched. What a strap does it turns the whole bend into compression by holding the ends. But I could not think of a way to use straps. And then it came to me, sandwich. I would sandwich the pieces between forms, rather than stretch them around the form. I do this on the crest rails all the time, more for a more consistent arc than to ward off breakage, but the theory is the same.
So I cut out some sandwich pieces and quickly sanded them and steamed the posts for an hour and a half, and then started the bending. And it worked! I had to frig with the clamps a little, but the bends look good. Of course its a long way from being dried and done, but it's a good (read better) start.
I also want to thank Ray Duffy, a chair maker from Central Mass, who graciously offered to get me some green cherry after my last bending debacle. And another thanks to Wilson Burnham for his blog post on axe handles. I asked Wilson a question about the general shape of axe handles and he took it and ran...great post and great blog.
Subscribe to:
Posts (Atom)

